Clik AI Cosmo 03 E-TAP DISPENSER

Cosmo is a reverse osmosis water cooler and carbonator designed for under-sink installation. It works with dedicated E-Tap series faucets (sold separately), offering flexibility in setup. You can use a single-hole E-Tap faucet with a pull-out spray or install an additional E-Tap faucet alongside your kitchen mixer for filtered water dispensing.

Water selection is easy with a touchpad featuring an LED indicator that displays the dispenser’s status through a color-coded system. With built-in Wi-Fi and WebApp integration, Cosmo connects seamlessly to the cloud and is fully compatible with Amazon Echo devices.

Cosmo does not require ventilation and can be installed even in compact spaces without airflow.

Logical Energy Saving and Logical Hardware Security enhance efficiency by reducing energy consumption and minimizing component operation time.

Standby mode and auto shut-off features optimize energy use.

Direct Steril Water, available only with single-hole E-Tap mixer taps, uses a specially designed faucet spout for both filtered and chlorinated tap water, ensuring sterilized dispensing. It prevents bacterial and biofilm buildup in the tubing and dispensing outlet, simplifies installation, and maintains high safety standards.

Logical Soda Control PLUS optimizes CO₂ cylinder management, preventing pure gas from being dispensed. It automatically stops sparkling water dispensing when the carbonation tank is empty and ensures a steady and continuous water flow.

The dispenser can be connected to an E-Tap series kitchen faucet or mixer.

If the water pressure exceeds 5 bar, a pressure reducer is required.

A drainage system is needed for water disposal.

For water hardness above 15°F, installing a water softener is recommended.

The dispenser is designed to communicate with external devices for cloud diagnostics and smart home IoT control.

Compatible with Amazon Echo devices.

Firmware can be updated OTA (Over-the-Air) directly via the WebApp.

The dispenser features Logical Hardware Security and Logical Energy Saving Plus, along with standby and auto shut-off functions.

Equipped with the Logical Anti Leaking PLUS system, it detects potential leaks between the dispenser and the faucet.

It also integrates advanced functionalities, including Direct Steril Water*, Diagnostic Control Safe, Logical Soda Control, Logical Pressure Control, and the Color Code System.

Filter management operates on two levels: the first provides a filter depletion alert, while the second allows for either an immediate or delayed block of filtered water dispensing.

*Available only with single-hole E-Tap mixer taps.

Clik Soda AI Cosmo dispenser

Power cable (2m)

Siphon connector for water drainage

CB 05 AG filter cartridge

6mm drain tube (red)

6mm outlet tube (black)

3/8” T-connector

3/8” double screw

3/4” x 3/8” flexible hose

Installation manual

WARNING: The complete dispenser consists of three components: Dispenser – Carbonation Kit – E-Tap Faucets. The carbonation kit must be paired with a suitable adapter for the selected CO₂ cylinder connection (not included).

CO2 INSTALLATION KIT ACME for dispensers – CODE 7K.ICO2ACME

CLIK CO2 CYLINDER 1 KG – CODE 7A.CO2N100ACME

E-TAP 3-WAY FAUCET MONO – L spout – CODE 915.BE03LUN00IS

AI E-TAP MIXER TAP WITH PULL-OUT SPRAY – Stainless steel – CODE 915.BE2ELDE00IS

WATER-COOLED
Allows operation in enclosed spaces and reduces noise during use.

 BLACK/SILVER

Power supply	220-240 VAC 50 Hz
Maximum power consumption	180 W, 0.9 A
Cold water output per hour	20 liters
Instant still cold water output	1 liter
Instant sparkling cold water output	1.5 liters
Inlet flow rate	minimum 10 liters per minute
Inlet pressure	minimum 1.5 bar, maximum 5.5 bar
Maximum cooling temperature	3°C
Temperature recovery time	3 minutes at 20°C
Refrigerant gas	R134A (0.18 kg)
Class	T
Dimensions (H/W/D)	39 cm / 26 cm / 48 cm
Packaging dimensions (H/W/D)	44 cm / 30 cm / 51 cm
Weight	25 kg